Stop the vehicle {immobilise} (starter disable feature wired)
6)
Disable your vehicle’s starter if it is stolen. The next time your vehicle’s ignition is
turned off and then on, it will not start.
Command:
123456STP
HA-GPS-01 replies ‘ Stop the car OK’
Make sure the vehicle is stationery when using the ‘Stop the vehicle’
command. Commercial Electronics will not accept any responsibility or liabilities
for misuse.
To enable engine after using the ‘Stop the vehicle’ command
7)
.
Once it is secure to do so, enable your vehicle’s starter from its disabled state.
Command:
123456RES
HA-GPS-01 replies ‘Relieve the car OK’
Restart the HA-GPS-01 tracker
8)
.
Command:
123456RESTA
HA-GPS-01 replies ‘System restarted’
Reset HA-GPS-01 tracker to factory default including pin numbers, setting etc
9)
Command:
123456RESET
HA-GPS-01 replies ‘System reset’
11
