Hawaiian shaved ice S-900A, Инструкция по эксплуатации

Страница: 13 / 18

9. For the fluffiest ice, allow the ice blocks or ice cubes to thaw for
about 5 -7 minutes before shaving. This will produce a fluffier
snow.
10. Place the ice block or ice cubes into the ice crusher cup (Figure
A. 2). Make sure that the ice block is removed from the plastic
ice mold before placing into the ice crusher cup (Figure A. 2).
11. During the freezing stage, the block of ice may become dome-
shaped. If this should happen, place the dome-shaped side of
the ice block down into the machine. The flattest side of the ice
block should be facing up.
12. Place the motor unit (Figure A. 3) on top of the ice. Plug the ice
shaver into an electrical outlet. Gently press and hold the grey
on/off button (Figure A. 4) while applying pressure to the top of
the motor unit. The motor unit will begin to shave the ice block
or ice cubes. To stop the motor unit from shaving, remove your
hand from the on/off button (Figure A. 4).
13. Apply your favorite premium HawaiianShavedIce.com shaved ice
flavoring and enjoy!
14. Unplug the ice shaver from the electrical outlet immediately after
use.
15.
After shaving an ice block or ice cubes, a thin block of ice will
remain inside the ice crusher cup (Figure A. 2). The remaining
ice must be thrown away before a new ice block is inserted into
the ice crusher cup (Figure A. 2). When removing the remaining
ice block, use caution and pay special attention to the blade and
avoid all contact with the blade to prevent injury to yourself or
others.
13