Hawaiian shaved ice S-900A, Инструкция по эксплуатации

Страница: 8 / 18

from the socket and take the appliance to an authorized
technical center for the necessary checks.
•
Before plugging in the appliance, check that the switch is not
in the “On” position.
•
Ensure that the ice shaver and the cable are not too close to
the edge of the table or work surface, and that it is not
touching heat sources; ensure also that it is not near a sink.
•
Never immerse the motor unit in water or other liquids.
•
Ice blocks that have not been made using the molds
supplied should never be placed in the container cup. Most
ice cubes from residential ice shavers may be used in the ice
shaver.
•
Substances other than ice that have been made using the
molds supplied with the appliance should never be place in
the container cup.
•
Never run the appliance while empty.
•
Never run the appliance before it has been correctly
mounted on its base.
• Never introduce fingers into the container cup as the blade is
very sharp and could cause injury.
•
Do not damage the blade by introducing metal implements.
•
Do not attempt to sharpen the blades; if necessary,
replacement blades may be purchased. Visit page 17 of this
instruction manual for ordering information.
•
To avoid overheating, do not run the appliance for longer
than 2 consecutive minutes. If you need to crush a large
quantity of ice, do so leaving pauses in between.
8