Need help? Contact us at [email protected]
1
Charging
Plug the included
charging cable
(USB end) into the included
power adapter
. Open the HAVEN
Control Panel
cover
(C)
and plug the charging cable into the
Charging Port (D)
. The status indicator LED will flash Yellow
every 2.5 seconds when charging.
Allow HAVEN to fully charge 6-8 hours before use.
This is now a good
time to set up your Haven account at myhavenlock.com or on the HavenLock mobile app.
2
Cycling the Lock
Cycling the lock a minimum of 10 times prior to installation ensures that the nylon straps inside the lock
are properly stretched and calibrated
. During shipment parts can settle and this cycling allows the parts to
“stretch” and maximize their effectiveness. A “cycle” is simply locking and unlocking the lock via the foot pedal
(F)
and lock gate
(E)
. Cycling the lock via the app a minimum of 5 times helps ensure the servo motor is
properly engaged and ready for use.
3
Include in Z-WAVE Network
Push the reset button through the pinhole and see “Network Inclusion/Exculsion” in the Z-WAVE section.
D
Charging Port
B
Pairing Button
Control Panel (with cover lifted)
R
Reset Button (use pin)
C
Control Panel Cover
A
Status Indicator LED
E
Locking Gate
F
Manual Foot Locking Pedal
PREPARING YOUR HAVEN CONNECT Z
5
HAVEN
CONNECT Z
