HAUTAU HS, Инструкция по монтажу, Страница: 54 / 72

54
Safety function check ‘reversing’
1
Teach-in run (‘Home-Init’) was carried
out, sash is opened
2
Position hard object (e� g� tool box)
between sash and frame, lean against
the frame
3
Press ‘CLOSE’ at the control
keypad (in case of 1-button
control keypad, the available
button will be pressed)
4
Sash runs against the hard object, stops and runs again in direction
‘OPEN’ partially
To avoid scratches at the frame
or at the sash, the object should
be covered with a suitable fabric�
Check was not successful:
Teach-in run (‘Home-Init’) and
safety function check ‘reversing’
have to be repeated
If the check was not successful
repeatedly, the (Lift-) Slide-System
has to be taken out of operation
and disconnected from mains as
well as a service company has to be
consulted for the purpose of
troubleshooting� Otherwise, severe
injuries could be the consequence�
yes
Check was successful:
(Lift-) Slide-System has to be
labelled according to the
EC machine directive
The (Lift-) Slide-System may be
put into operation
no