Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid.
Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, [email protected] • Errors and technical changes reserved.
… convincing solutions
english
3. Operating instructions
CAUTION! TOOLS MAY NEVER BE USED WITHOUT FIRST INSERTING THE PRESSING DIES.
Ensure that the pressing dies fit precisely to the appropriate area and are seated perfectly in
the holders.
OTHERWISE THIS MAY CAUSE SERIOUS DAMAGES OR BREAKAGES AND THE GUARANTEE WILL
BE VOIDED.
Preparation
Before starting up the tool, read the operating instructions first.
All current-carrying elements in the area you are working in should be disconnected.
Otherwise the protective procedures for working in the vicinity of components under current
must be implemented. (DIN EN 50110)
Do not use the tool if you are tired or under the influence of medication, drugs or alcohol.
Take into account the valid accident prevention and safety regulations and use the tool exclusi-
vely for the purpose for which it is intended.
Only electro-technically trained persons over 16 years of age may process connecting materials
using the tool.
The operating instructions must always be carried with the tool.
The instructions must have been read and understood by the user.
The operator must ensure that this is the case.
• Pressing dies from 10 to 120 mm
2
can be used on both sides (2 conductor cross-sections
with only one pressing die)
• Area of application in accordance with the available pressing dies (max. 240 mm
2
DIN tube
terminals)
Содержание SMART-LINE SH-6
Страница 8: ...Exploded assembly drawing art 215881...
