1. Technical data
Area of application:
For the creation of an electrical connection by means of
compression
Scope of delivery:
1 crimping tool, 1 charger, 2 batteries, 1 carry loop, in plastic case,
without pressing dies.
Pressing force:
60kN
Oil type:
ISO class viscosity 15
Safety:
The tool is fitted with a safety value that has been set at the factory.
Structure:
The working head can be rotated by 180° to make it easier to adapt
to the operation to be carried out. The model Art. 215881 does not
protect the operator when working on cables that carry power.
Guarantee:
2 year guarantee if used for the purpose it is intended
2. Area of work/Performance characteristics
• Pressing force in kN: 60kN
• Working pressure in bar: 700
• Head can be opened
• Opening / Hub: 9 mm
• Pressing width: slim
• Motorstop
• Crimping range cable lugs: Cu 10-240 / DIN Cu 10-240 / DIN Al 16-185
• Crimping range connectors: Cu 10-240 / DIN Cu 10-240 / DIN Al 16-185
• Pressing time, battery-operated in seconds: 2
• Battery charging time in minutes: 60
• Battery type: NiMH, 14,4 V, 3 Ah
• Weight in kg: 2,4
• Weight Set in kg: 3,2
• 6 tonnes of pressing force for maximum performance
• Motor stop. The feed is stopped immediately the operating switch is released.
No post-travel of the piston
• 180° rotating crimping head. Can thus be mounted even in places that are difficult to
access
• Manual return enables shorter process cycles and saves battery capacity
• The manual return enables the operator to bring the piston back to the starting point in
the event of a faulty pressing.
• After the pressing is completed, the device operates in idle.
(If the compression is not completed, manual return of the piston on the return operation
button is „very perceptibly“ more difficult)
• The two button operation ensures logical, simple and quick single-handed operation.
• The tool is supplied with 2 NiMH batteries, 3 Ah and a quick charger.
• The second battery ensures continuous operation.
(One battery in use, the other in the charger)
Содержание SMART-LINE SH-6
Страница 8: ...Exploded assembly drawing art 215881...
