haupa SMART-LINE SH-6, Инструкция по эксплуатации

Страница: 5 / 8

Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid.
Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, sales@haupa.com • Errors and technical changes reserved.
… convincing solutions
english
Charging
Before using the tool, charge the battery as follows:
Connect the cable of the charger to a socket (AC).
As soon as the charger is connected to the power supply, the red LED will light up.
Inserting the battery into the charger
Insert the battery firmly, as shown in
Illustration
2 shown here,
until it touches the bottom of the charging compartment.
ATTENTION:
If the battery is inserted incorrectly (
Illustration
1),
it will not only not be charged, it may also damage the charger
(e.g. by bending the terminals/short-circuiting).
Charging
When you insert a battery into the charger, the battery will start charging and the green control
light will also light up.
When the battery is fully charged the green control light will flash.
If the yellow control light comes on, the battery is overheating. Remove the battery immediately
and disconnect the charger from the power supply.
5. Care and maintenance
Cleaning
• Careful cleaning of the tool, in particular, the moving parts contributes towards a longer use-
ful life. Remember that dust, sand, environmental influences, in particular a high salt index, and
dirt in general are extremely damaging to hydraulic tools.
• Particular care should be taken when cleaning the pump drive piston and the piston.
The tiniest of contaminations may scratch the walls of the cylinder and damage the leak-proof
seals. For the correct cleaning of the piston, we recommend extending the piston and then
cleaning it with a high-quality, non-corrosive solution.
Power switch
Check to see whether the switch on the machine automatically pops out again when you
release it.
Storage
To prevent damage to the tool as a result of bumps, dust etc. you should if possible store the
tools in the original packaging.
Illustration 2