Haulotte HT23RTJ O, Книга по эксплуатации

Страница: 281 / 534

281 4001055250 E 10.21 USA / GB
Upper boom
Remove/replace the telescope cylinder
MS0227
• Glue the 6 screws of the telescopic cylinder bracket using blue
threadlocker. Tightening at a torque of 44 Nm.
• Tighten the screws on the tightening pads to a torque of 10 Nm and the
pad nuts to 45 Nm. Take care not to put white grease in the threading
of the pads.
• Remove the extension cable plate the right way round.
• Glue the 2 screws of the adjustment stops with medium threadlocker.
Tightening at a torque of 22 Nm.
• The 2 screws connecting the telescope retraction cables must be glued
with medium threadlocker.
N.B.-:-T
IGHTENING AT A TORQUE OF
10 N
M
.
• The screw head of the clevis pins must face towards the outside
of the boom.
• Fold in the locking plates 4000004140 after tightening the screws.