215
4001055250
E 10.21
USA / GB
Chassis and turret
KUBOTA diesel engine
MS0029
5.1.3 - Checking the fuel pipes
5.2 -
R
ADIATOR
5.2.1 - Checking radiator hoses and clamp
Check to see if radiator hoses are properly fixed every 200 hours of operation or 6 months, whichever
comes first. :
1.
If hose clamps are loose or water leaks, tighten hose clamp securely.
2.
Replace hoses and tighten hose clamps securely, if radiator hoses are swollen, hardened or
cracked.
Replace hoses and hose clamps every 2 years or earlier, if checked and found that hoses are swollen,
hardened or cracked.
To avoid personal injury :
• Check or replace the fuel pipes after stopping the engine. Broken
fuel pipes can cause fires.
Check the fuel pipes every 50 hours of operation :
• If the clamp band is loose, apply oil to the screw of the band,
and tighten the band securely.
• If the fuel pipes, made of rubber, became worn out, replace
them and clamp bands every 2 years.
• If the fuel pipes and clamp bands are found worn or damaged
before 2 years' time, replace or repair them at once.
• After replacement of the pipes and bands, air-bleed the fuel
system.
When the fuel pipes are not installed, plug them at both
ends with clean cloth or paper to prevent dirt from entering.
Dirt in the pipes can cause fuel injection pump malfunction.
1
Clamp band
2
Fuel pipe
To avoid personal injury :
• Be sure to check radiator hoses and hose clamps periodically. If radiator hose is damaged or coolant leaks,
overheats or severe burns could occur.
Содержание HT23RTJ O
