Haulotte Group star 13 Скачать руководство пользователя страница 82

Страница: 82 / 104

4000426500

E 02.16

USA / GB

STAR 6 - STAR 13

- Operation instructions

5.8.1.4 - Procedure for the use of slings

The machine must be completely stowed (Extension retracted). Designated lifting points are
marked/labeled with the following symbol

Position the spreader line up with the chassis.

Fold up the 4 slings 2 m (6 ft 7 in) 3 T over the tie-down points. Adjust properly to
prevent any damage to the machine.

Attach the slings using shackles

Pay particular attention to avoid slings over sharp edged surfaces as they may be severed/damaged.

Properly adjust rigging to keep the machine level and to minimize the risk of damage to the machine.

• Lifting procedure must be handled very carefully.

• All movements of the machine must be performed slowly and deliberately to minimize swaying of the

machine being lifted.

• Always keep machine as close as possible to the ground level.

Содержание star 13









































































































Результаты поиска

Содержание star 13

Отзывы:

Похожие инструкции для star 13

Бренды по названию

Популярные бренды

Haulotte Group star 13, Руководство оператора

Результаты поиска

Содержание star 13

Отзывы:

Похожие инструкции для star 13

Бренды по названию

Популярные бренды