Haulotte Group star 13 Скачать руководство пользователя страница 12

Страница: 12 / 104

4000426500

E 02.16

USA / GB

STAR 6 - STAR 13

- Foreword

2.1.3 - Overturning / Tip-over Hazards

Before positioning and operating the machine :

• Ensure that the surface is capable of supporting the machine weight

including the rated capacity. Check the load bearing capacity of the
supporting ground.

• Do not exceed the maximum rated capacity that includes the weight of

both material and allowed number of occupants. Do not exceed the
allowable number of occupants.

• Place the loads uniformly distributed on the platform floor.

• Do not increase the working height (using extensions, ladder, etc.).

• Do not place ladders or scaffolds in the platform or against any part of

this machine.

• Do not use the machine in winds exceeding the permissible limit.

• Do not increase the surface area of the platform exposed to wind. This

includes adding panels, mesh, banners. Be aware when working with
materials with a large surface area. This will add to the wind load on the
machine.

• Do not raise the platform or drive with platform elevated on an incline

exceeding the rated slope for the machine.

• Do not drive the machine on slopes or grades exceeding the specified

limits.

• Do not replace components critical to stability with components of

different weight or specification.

• Do not use the machine with material or objects hanging from the

guardrail or the boom.

• Do not pull or push towards any object outside of the platform. Do not

exceed the maximum allowable side force stated in the performance
specifications.

• Do not use the machine to support any external structure.

• Do not use the machine to tow other machines or to drag materials.

Содержание star 13









































































































Результаты поиска

Содержание star 13

Отзывы:

Похожие инструкции для star 13

Бренды по названию

Популярные бренды

Haulotte Group star 13, Руководство оператора

Результаты поиска

Содержание star 13

Отзывы:

Похожие инструкции для star 13

Бренды по названию

Популярные бренды