Haulotte Group star 13, Руководство оператора

Страница: 67 / 104

A
B
C
D
E
F
G
H
I
67 4000426500 E 02.16 USA / GB
STAR 6 - STAR 13
C
- Pre-operation inspection
4.4 - SLOPE WARNING DEVICE
From each control box, a buzzer alerts the operator that the machine is not folded/stowed and
is positioned on a slope exceeding the slope allowed.
N.B. -:-The slope sensor is only active when the platform is not in the stowed position.
When machine is on a slope greater than the rated slope, with extending structure out of the
stowed position, DRIVE function is disabled(For CE and AS only).
All functions speeds are reduced.
In this case, fully retract the mast and reposition the machine on level ground before extending
the mast again.
To restore the drive function, perform the function movements in the following sequence :
1. Lower the mast.
To check the tilt sensor at ground control box
Safety prop
4.5 - TRAVEL SPEED LIMITATION
Drive speed is proportional to control, without restriction, until the maximum speed is reached
(machine in fully stowed position).
The only speed allowed when not in stowed position is microspeed (This speed is a default
speed programed into the machine).
Step Action
1 Pull both E-Stop buttons (15) at ground box and (46) at platform box.
2 Turn the control box activation selector key (92) downwards to activate the ground control box.
3
Raise the telescoping mast upto 1,20 m(3 ft11 in). Insert the safety prop ( 1 ) in the hole to lock the
mast.
4 Locate the tilt sensor on top of the chassis (ground control box side).
5 Manually tilt and maintain the tilt sensor towards the front for a few seconds.
6 The audible beep sounds.
7 For machines fitted with : The slope sensor prevents lifting and driving movements.