Haulotte Group star 13 Скачать руководство пользователя страница 83

Страница: 83 / 104

4000426500

E 02.16

USA / GB

STAR 6 - STAR 13

- Operation instructions

5.9 -

LOADING AND UNLOADING WITH FORKLIFT

Unloading

• Carefully lift the machine and make sure that the machine weight is properly balanced.

• Slowly lower the machine and place it on the ground.

• Completely lower the mast.

• Ensure that the potholes are retracted.

The machine must be in the fully stowed transport position.

• Ensure that the machine controls are in the OFF position.

• Forklift used to load and unload must have adequate capacity (Refer

Section B 4 Technical specifications).

• Adjust the forklift forks spread to match with the machine fork pockets.

• Carefully insert the forklift forks in the designated machine fork pockets.

• Slightly tilt back the forklift forks.

Never place yourself below or too close to the machine during loading.

Brake slowly.

A wrong move can lead to machine tipping over and may cause serious injuries and material damage.

Содержание star 13









































































































Результаты поиска

Содержание star 13

Отзывы:

Похожие инструкции для star 13

Бренды по названию

Популярные бренды

Haulotte Group star 13, Руководство оператора

Результаты поиска

Содержание star 13

Отзывы:

Похожие инструкции для star 13

Бренды по названию

Популярные бренды