Long Bed:
•
Position the rear end
of the Large Slide Base (21) inside
the bed and just touching the closed
tailgate. For very high trucks, it
may be necessary to leave the tail-
gate off.
Short Bed (tailgate left on):
•
Posi-
tion the rear end of the Large Slide
Base (21) inside the tailgate, 1/2” to
1-1/2” from the end of the tailgate.
Short Bed (tailgate off):
•
Posi-
tion the front end of the Large Slide
Base (21) immediately next to (with-
in 1/2”) the front of the truck bed.
Extreme Short Bed (tailgate on or
•
off):
Position the front end of the
Large Slide Base (21) immediately
next to (within 1/2”) the front of the
truck bed.
Note: Attaching a red flag may be
•
required; contact your local Depart-
ment of Motor Vehicles for regula-
tions.
Remove the Winch’s Nylon Guide
5.
Wheel (9) located on the Front
Mounting Channel. There is a mount-
ing hole under the Wheel.
(See Figure B.)
There is also one mounting hole in
6.
the Middle and Rear Mounting Chan-
nel.
(See Figures C and d.)
FIguRE C
MIddLE
MOunTIng CHAnnEL
MOunTIng
HOLE
FIguRE d
REAR
MOunTIng
CHAnnEL
MOunTIng
HOLE
Use the one mounting hole and two
7.
mounting slots in the Front Mounting
Channel as templates to mark and
drill three
17/32”
diameter holes in
the truck bed.
(See Figure B.)
Use the one mounting hole in either
8.
the Middle Mounting Channel or Rear
Mounting Channel as a template to
mark and drill one
17/32”
diameter
hole in the truck bed.
(See Figures C and d.)
SKU 99900
For technical questions, please call 1-800-444-3353.
Page 6
FIguRE B
TEMPORARILY
REMOvE
nYLOn guIdE WHEEL (9)
TO EXPOSE
HIddEn
MOunTIng HOLE
MOunTIng
SLOT
MOunTIng
SLOT
FROnT
MOunTIng
CHAnnEL