Form No. GRSSRDLM-0607
7
MAINTENANCE
GENERAL
The Hatco Glo-Ray
®
Round Heated Stone Shelf with
Display Lamp is designed for maximum durability
and performance, with minimum maintenance.
WARNING
To avoid any injury or damage to the unit turn the
power switch OFF, unplug the unit and allow to
cool before performing any maintenance or
cleaning.
CLEANING
General
To preserve the finish of the Glo-Ray Round Heated
Stone Shelf with Display Lamp, it is recommended
that the surfaces be wiped daily with a damp cloth.
WARNING
The Glo-Ray Round Heated Stone Shelf with
Display Lamp is not waterproof. To avoid
electrical shock or personal injury or damage to
the unit DO NOT submerge or saturate with
water. Do not operate if it has been submerged
or saturated with water.
CLEANING FOR SWANSTONE SOLID
BASE SURFACE
Use of the following products will not damage the
Swanstone
®
Solid Surface. Follow the directions on
the product labels. If these methods fail to produce
acceptable results, contact the Swanstone
representative in your area.
Hard to Remove Stains
For hard to remove stains, abrasive cleaners
recommended include Ajax, Comet, Bon Ami, or Bar
Keeper’s Friend. Also, the use of an abrasive pad
such as “Scotch-Brite.”
NOTE: Do not use steel wool or metal scouring
pads.
Mineral Based Stains
For a mineral based stain, cleaners designed to
remove iron or rust are recommended and should
not harm Swanstone.
Scratches
For scratches use sandpaper starting with coarsest
grit and going to finest grit until scratch disappears.
Blend area in with abrasive finishing pad.
WARNING
If service is required on this unit, contact your
Authorized Hatco Service Agent, or contact the
Hatco Service Department at 800-558-0607 or
414-671-6350; fax 800-690-2966 or International
fax 414-671-3976.
WARNING
This product has no “user” serviceable parts. To
avoid damage to the unit or injury to personnel,
use only Authorized Hatco Service Agents and
Genuine Hatco Replacement Parts when service
is required.
WARNING
Genuine Hatco Replacement Parts are specified
to operate safely in the environments in which
they are used. Some aftermarket or generic
replacement parts do not have the
characteristics that will allow them to operate
safely in Hatco equipment. It is essential to use
Hatco Replacement Parts when repairing Hatco
equipment. Failure to use Hatco Replacement
Parts may subject operators of the equipment to
hazardous electrical voltage, resulting in
electrical shock or burn.
CLEANING FOR DECORATIVE LAMP
To preserve the finish of the upper Decorative Heat
Lamp it is recommended that the lamp shade
surface be wiped daily with a soft damp cloth.
Stubborn stains can be removed with a mild non-
abrasive cleaner.
WARNING
To avoid electrical shock or personal injury, do
not steam clean or use excessive water on the
unit.
WARNING
To avoid any injury or electrical shock, turn
the power switch and the fuse disconnect
switch/circuit breaker off. Allow to cool
completely before performing any maintenance
or cleaning.
NOTICE
Use only non-abrasive cleaners. Abrasive
cleaners could scratch the finish of your
Decorative Heat Lamp, marring its appearance
and making it susceptible to dirt accumulation.
Содержание GLO-RAY GRSSR20-DL Series
Страница 14: ...Form No GRSSRDLM 0607 12 NOTES ...
Страница 15: ......
