Hatco GLO-RAY GRSSR20-DL Series, Инструкция по установке и эксплуатации

Страница: 3 / 16

Form No. GRSSRDLM-0607
1
IMPORTANT SAFETY INFORMATION
WARNINGS
For safe and proper operation, plug unit into
a properly grounded electrical outlet of the
correct voltage, wire size and plug
configuration. If the plug and receptacle do
not match, contact a qualified electrician to
determine the proper voltage and size and to
install the proper electrical outlet.
The Glo-Ray ® Round Heated Stone Shelf
with Display Lamp is not waterproof. To
avoid electrical shock or personal injury DO
NOT submerge in water. Do not operate if it
has been submerged in water. Do not steam
clean.
To avoid any injury, turn the power switch
OFF, unplug the unit from the power source
and allow to cool completely before
performing any maintenance or cleaning.
To avoid any injury, turn the power supply
OFF to the mounting location before
installing.
For safe and proper operation, the unit must
be located at 1" (25.4 mm) distance from
combustible walls and materials. If safe
distances are not maintained, discoloration
or combustion could occur.
To prevent any injury or damage to the unit
do not pull unit by power cord.
To prevent any injury, discontinue use if
power cord is frayed or worn.
Some exterior surfaces on the unit will get
hot. Use caution when touching these areas
to avoid injury.
WARNINGS
GRSSR20-DL standard watt heat lamps
(250 watt bulb) must have a minimum of
16" (406 mm) above a flammable surface.
If safe distances are not maintained,
discoloration or combustion could occur.
GRSSR20-DLH high watt heat lamps
(375 watt bulb) must have a minimum of
27" (686 mm) above a flammable surface. If
safe distances are not maintained,
discoloration or combustion could occur.
For safe and proper operation, do not install
a 375 watt bulb into a GRSSR20-DL standard
watt unit.
If service is required on this unit, contact
your Authorized Hatco Service Agent, or
contact the Hatco Service Department at
800-558-0607 or 414-671-6350; fax 800-690-
2966 or International fax 414-671-3976.
This product has no “user” serviceable
parts. To avoid damage to the unit or injury
to personnel, use only Authorized Hatco
Service Agents and Genuine Hatco
Replacement Parts when service is required.
Genuine Hatco Replacement Parts are
specified to operate safely in the
environments in which they are used. Some
aftermarket or generic replacement parts do
not have the characteristics that will allow
them to operate safely in Hatco equipment.
It is essential to use Hatco Replacement
Parts when repairing Hatco equipment.
Failure to use Hatco Replacement Parts may
subject operators of the equipment to
hazardous electrical voltage, resulting in
electrical shock or burn.
IMPORTANT! Read the following important safety information to avoid personal injury or
death, and to avoid damage to the equipment or property.