Hatco Glo-Ray GR2SDH-24, Инструкция по установке и эксплуатации

Страница: 6 / 24

Form No. GR2SDM-0707
4
MODEL DESIGNATION
Figure 4. Plug Configurations
*
Receptacle not supplied by Hatco.
SPECIFICATIONS
NEMA 5-15P NEMA 5-20P NEMA 5-30P
PLUG CONFIGURATIONS
Most units are supplied from the factory with an
electrical cord and plug attached. See Figure 4.
WARNING
Units supplied without electrical plug require
field installation of proper electrical plug. Plug
must be proper for the electrical specifications
of the unit and power supply and be grounded.
On units supplied without plug, connect the proper
plug to the cord, making sure the plug is rated for
the specific load and the plug matches a suitable
receptacle.
WARNING
For safe and proper operation, plug unit into a
properly grounded electrical outlet of the correct
voltage, wire size and plug configuration. If the
plug and receptacle do not match, contact a
qualified electrician to determine the proper
voltage and size and to install the proper
electrical outlet.
Figure 3. Model Designation
GR 2 S D H - 24 D
Glo-Ray
Designer
Sandwich
H = Horizontal Shelf
S = Slant Shelf
Dual Shelf
Display
Heated Surface Width
*
*
* *
NEMA L14-20P NEMA L14-30P
NEMA 14-20P NEMA 14-30P
CEE 7/7 Schuko
*
BS 1363
*
* *
*