Hatco Glo-Ray GR2SDH-24, Инструкция по установке и эксплуатации

Страница: 19 / 24

Form No. GR2SDM-0707
17
ACCESSORIES
DISPLAY SIGN HOLDER
Advertise specials or showcase product with easy-
to-use signs. To install sign holder, follow these
steps.
1. Attach strap clip brackets (Figure 12) to sign
holder brackets with screws and cap nuts. Two
hole positions on the sign holder brackets provide
angle adjustment. Select the desired holes for
placement on either a slant or horizontal unit.
(See Figure 13.)
2. Position the straps on top of the warmer and
carefully snap them over the top of the bull nose
trim piece on the front and rear of the warmer.
(See Figure 14.)
3. Insert a thin sign panel behind the clear panel
provided. Maximum total thickness is 1/4" (6 mm).
Figure 14. Display Sign Holder
Figure 12. Strap Clip Assembly
Figure 13. Sign Holder Assembly
Bracket
Strap Clips
Bracket
Sign Holder
Sign Holder
Bracket
Holes for Adjustment
Strap Clip Bracket
Strap Clip