Haskel Q-Drive QGD Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 16 / 66

Q-Drive Installation, Operation, and Maintenance Manual
10 of 59
Symbol Definition
Pauses the pump temporarily, regardless of operating mode,
but does not vent or isolate the system.
When using Fill & Pause mode, the Ack button restarts the
pump.
Set or change the Cycle Rate, Cycles per Minute (CPM). The
button shows the current value.
Set or change the target output pressure for the gas (BAR/psi).
Set or change the temperature scale. When you select C, the
pressure units change to the metric bar; when you select F, the
pressure units change to psi.
Displays the current stroke force during running. The forward
stroke pushes to the right and the backward stroke pushes to
the left. The maximum force is 150 kN (33,721 lbf), which
usually occurs at maximum gas pressure.