HARVEY Gyro Air G-1000, Руководство по эксплуатации, Страница: 15 / 34

14
5.1.2 Alarm information display area B （ Fig. 10-2 ）
Fig.10-2
There is no display in normal status.
B1: Converter error code display.
B2: Shows the alarm of communication failure between touch screen and converter.
5.1.3 Operation and control area C
（
Fig. 10-3
）
Fig.10-3
C1: Start/Stop button and machine alarm status instruction
Button C1 mainly shows the Start/Stop and alarm instruction of machine. Keep c licking this
button for more than 0.1s to take effect.
When this button background is green, it means that the machine is in the state of power on and
standby. Click it to start the machine, and the button background will display red.
When the button background is red, it means that the machine is running, click it to stop the
machine;If the machine is set to delayed stop, after clicking the button, the countdown of delayed
stop will display below the button (The delayed stop time is 10 minutes) will be displayed below
the button;If you need to stop the machine immediately, you can click again after 1s, and the
machine will be stopped immediately.
When the button background is yellow, it indicates that the dust is full or the filter is clogging.
Note: In the yellow state, you can click the button to start and stop the machine.
C2:
Filter dust cleaning
C2 is the manual dust cleaning, click this button, the machine will clean dust for a period of time.
Note: If the machine is in the dust cleaning period, this button will show light colour, and
the button can not be operated at this moment.
If the “Dust cleaning forbidden in running” is set, this button will show light colour, and
the button can not be operated at this moment.