HARVEY Gyro Air G-1000, Руководство по эксплуатации, Страница: 11 / 34

10
4.2 Positioning the machine
Fig.4
The machine should be placed at least 50cm (18 inches) away from the wall to ensure that the
motor heat dissipation is adequate.
4.3 Assembly
4.3.1 Unpacking
Open shipping container and check for shipping damage. Report any damage immediately to
your distributor and shipping agent.
4.3.2 Removing the Pallet
As shown in Fig. 5, the machine is mounted on a pallet by four (4) L shaped brackets. Remove
the 4 brackets by loosening the bolts. Lift the machine by the forklift and remove the pallet
The side of the machine where the motor is mounted is heavier therefore its important to
keep the machine balanced while lifting it to avoid serious injury.
To avoid serious injury, engage the two rubber feet once the machine is in its final position
to prevent unexpected movement (See Fig 6).
Fig.5 Fig. 6