HARVEY Axminster Trade AT220TSM, Руководство пользователя, Страница: 5 / 48

- 3 -
3. Machine Description
3.1 Feature Identification
A Cabinet
B
Arm
C
Crosscut table
D Crosscut Fence
E Sliding table
F Guard
G Control panel
H Table
I
Electrical box
Fig.1
3.2 Intended Use
1. Purpose of the Machine
The machine enables semi-finished products made of wood or materials based on wood to be
milled with a spindle
The machine is designed for operation performed by one worker only.
Safety devices in accordance with EN ISO 19085-6:2017 must be used in mortising operations.
The machine must not be handled by children and youngsters in any manner.
2. Worker Qualifications
Only expert skilled in the field of wood-machining or a worker instructed and trained by such
expert may operate the machine, regardless of the sex. While working on the machine, the
operator must get familiar with these instructions and comply with any safety rules, regulations
and provisions in force in the respective country.
3. Working Environment
The machine must be operated in a workshop environment, complying the environment
classification danger of inflammable dust fire (BE2N2), the temperature of which does not
40°C and does not drop below +5°C, the relative humidity of air is from 30% to 95%
non-condensing, the height above the sea level is up to 1000m,
4. Machine Operator Positions
The shaper is intended to be operated from the following position:
On the left of the sliding table at the front of the machine, seen in the feed
direction
The machine is prohibited to be used in a potentially explosive
atmosphere!
Fig.2
3.3 Dimensions and Weights
Machine Box Type
Net Weight
(Kg)
Gross Weight
(Kg)
Box Dimension
(DxWxH mm)
E-305S
Machine box 485 515 1650x1150x1092
Crosscut fence box 15 25 2000x320x170