HARVEY Axminster Trade AT220TSM, Руководство пользователя, Страница: 24 / 48

- 22 -
7.1.2 Display control unit (Touch Screen)
When you power on the machine, the Touch Screen will show as
Fig.32
, the “WARNING!” is very
important for both the operator and the machine.
7.1.2.1 Set cutter head speed limit
Press the key “SKIP” to enter into the interface as shown in
Fig.33-1
, and press “SET” to enter
into the interface as shown in
Fig.33-2
.
Fig.32 Fig.33-1
Fig.33-2 Fig.33-3
Touch the “T1”, enter the diameter of the cutter. (
Fig.33-2)
Touch the “T2”, select the SAFE SPEED of the cutter. (
Fig.33-2)
After setting the cutter size and safe speed, press “Confirm” to return to the main interface
(
Fig.33-3
).
7.1.2.2 Basic introduction of main interface (Fig.33-3)
Zone A: Press the keys to adjust the height, tilt, and speed of the spindle
Zone B: Show the positions and speed of the spindle.
Zone C1: Show the cutter linear speed of the spindle.
Zone C2: Show the cutter safe rotating speed of the spindle.
Zone D: Press the keys to set up, calibrate, and show operation record and manual.
Zone E: In some cases, you can touch “Back” to return to the main interface directly.
Zone F: Alarm Indicator, you can touch it to get the alarm information.
Zone G: Date and time display.
Zone H: Speed range display.
When use the machine for the first time, you need to follow the section of “7.1.2
Calibration” firstly.
T2
T1
F
A
B
C
1
H
G
D
C
2
E