HARVEY Axminster Trade AT220TSM, Руководство пользователя, Страница: 26 / 48

- 24 -
7.1.2.5 Spindle speed adjustment (Manual control)
After touch the Speed Adjustment key (I), a separate control window will show on the right of
the display, as
Fig.36.
After touch the key J ( as
Fig.36
), the keypad will be shown in the middle of
the screen, enter the desired speed and confirm by pressing “ OK ” to get the desired speed.
Fig.36 Fig.37
If the Switch is in CCW position, press START1 button and START2 button at the same
time to start the spindle; If the
switch
is in CW position, press START1 button to start the
spindle, press STOP button to stop the spindle, see
Fig. 37.
While the spindle is rotating, speed can be adjusted directly.
When you enter the desired speed, please pay attention to the “Speed Range” warning as
Fig.36.
There are two speed ranges of this machine:1500-5000 and 3000-10000, please see
chapter.7.4 to change the speed range.
I
J
Start2
Start1 Stop
Switch