Harvard Bioscience 800 2770, Руководство пользователя

Страница: 5 / 23

4
It is in the interests of your organization and of every person who is
responsible for the custody, operation, and maintenance of the CMA 470
Refrigerated Fraction Collector that the foregoing guidelines are complied with
at all times. In the event of an accident, failure to comply could result in legal
liability.
3 UNPACKING & ASSEMBLY
The CMA 470 Refrigerated Fraction Collector is delivered in a specially
designed box to protect the instrument against damage during transportation.
The reusable carton provides excellent protection should it be necessary to
transport the instrument or store it for a long period of time.
3.1 Packing list
The CMA 470 Refrigerated Fraction Collector, Ref No 800 2770 consists of:
- Refrigerated Fraction Collector equipped with Holder for Single Cannula
- External Power Supply
- EU Power Cable
- US Power Cable
- 4 Cassettes for Small Vials
- Holder for Quadruple Cannulae
- Holder for Dual Cannulae
- Cannula for Tubing 4 pcs
-
Cannula for Septa 4 pcs
-
User's Manual
After unpacking the instrument, check the contents against the above packing
list to ensure that the shipment is complete. Inspect all items for damage. Any
damage or missing parts should be reported immediately to your local supplier
or CMA/Microdialysis AB. Remove the transport security material.
3.2 Positioning the Unit
The CMA 470 Refrigerated Fraction Collector can stand directly on a
laboratory workbench or any other flat stabile, vibration-free surface adjacent
to a grounded
wall socket (required).
NOTE: Make sure the drain tubing is not kinked under the instrument so that
the moisture from the cassette magazine can be drained. Place the outlet end
on the same level, or lower, as the bottom of the instrument.
3.3 Connections
For connection to the mains, use the External Power Supply (12 VDC, 55 W,
included).
Please note the following when connecting other CMA instruments to
your CMA 470 Refrigerated Fraction Collector:
Before plugging the Fraction Collector into the socket, check that the input
voltage and frequency correspond to the information given on the nameplate
on the power supply for the instrument.
3.4 Installation of accessories
For the installation of Cassettes, Holder for Cannulae and Cannulae refer to
Sections, 4.1 - 4.10 and 6.