Hartzell HC-C2YR-4CF/FC8475-6, Руководство пользователя и журнал учета

Страница: 54 / 306

Propeller Owner's Manual
115N
INTRODUCTION
61-00-15
Page 1-28
Rev. 24 Dec/20
Term Definition
Reversing The capability of rotating blades to a
position to generate reverse thrust to slow
the aircraft or back up
Scratch Same as “Nick”
Short Circuit Connection of low resistance between
points on a circuit between which the
resistance is normally much greater
Shot Peening Process where steel shot is impinged on
a surface to create compressive surface
stress, that provides improved strength and
resistance to fatigue
Single Acting Hydraulically actuated propeller that utilizes
a single oil supply for pitch control
Split Delamination of blade extending to the
blade surface, normally found near the
trailing edge or tip
Station Line See "Blade Station"
Synchronizing Adjusting the RPM of all the propellers of a
multi-engine aircraft to the same RPM
Synchrophasing A form of propeller sychronization in which
not only the RPM of the engines (propellers)
are held constant, but also the position of
the propellers in relation to each other
Ticking A series of parallel marks or scratches
running circumferentially around the
diameter of the blade