6
Reloading Procedure
It is important to note that when and how you reload your fire is important.
Please follow these steps when reloading.
The door should not be opened until the wood inside has burned down to red
embers and large yellow flames are minimal. The goal is to burn your wood in
cycles for the cleanest and most efficient burn.
If the fire has been on low, turn the fire onto the high setting for 5 min-
utes before reloading.
Depending on the firebox, place the wood in the appropriate orientation,
either front to back or side to side and ensure that the size of wood is ap-
propriate for your firebox.
Do not overfill you fire box with wood. You should fill your firebox only to
about 2/3 capacity.
Once you have loaded your wood, close the door and turn to high for ap-
proximately 5 minutes to allow for the wood to fully ignite. Then you can
turn to a lower setting if desired.
Allow the wood to burn right down to large red embers with minimal yel-
low flame before repeating the process.
