Harrington FireSpy Tracker T1000, Руководство по установке

Страница: 5 / 48

D
3
A
B
C
2
1
HSI #780-0867 FireSpy Tracker Installation Manual
1
1 Preliminary Information
1.1 Safety messages – Please read before proceeding
People’s lives depend on your safe installation of our products. It is important to read, understand and
follow all instructions shipped with this product. The equipment described herein is listed by the NRTL
only when installed and configured in the manner described herein
It is possible to install equipment incorrectly or arrange system components and installation wiring in such
a manner that life safety functions are not properly performed and, as a result, lives may be lost. To
minimize this possibility, become familiar with the system layout and operation of the entire Fire-
Protective Signaling System. Do not alter any mechanical or electrical features of the equipment supplied.
Become familiar with the Building Code and Fire Prevention Code or other authority having jurisdiction
requirements in the area of the installation.
The Facilities Engineer and the Safety Engineer should make selection of mounting location for this
equipment and routing of wiring. Listed below are some other important safety instructions and
precautions you should follow:
•
This unit must be installed by a qualified electrician in accordance with NFPA 72, and national and
local electrical and fire codes, under the direction of the authority having jurisdiction.
•
Only authorized and competent personnel must be allowed access to panel controls or panel power
source, to limit the possibility of malfunction or failure.
•
Do not connect this unit to system wiring when circuits are energized. Check field wiring lines to
ensure that voltages are not present. Warranty is void if the equipment is damaged by improperly
connected untested wiring or if fused improperly.
•
The equipment must be connected to a dedicated source of reliable AC power adequate for the rating
of the system as configured. The source must be secure and properly labeled "Fire Alarm Circuit
Control".
•
A suitable battery set must be used to assure required operation in case of primary power loss. The
battery set must be replaced after 4 years, or earlier if capacity is excessively reduced. The batteries
should be checked at least twice per year, or more often if required by local codes.
•
Wiring used in the system must be adequate for the service and installed in accordance with
applicable codes.
•
Devices used in the system and connected to the control panel must be verified compatible with the
panel.
•
All effective warning speakers produce loud sounds which, in certain circumstances, may cause
permanent hearing loss. Take appropriate precautions such as wearing hearing protection.
Recommendations in OSHA Sound Level Standard (29 CFR 1910) should not be exceeded.
•
After installation and completion of initial system test, provide a copy of this instruction sheet to all
personnel responsible for operation, periodic testing and maintenance of this equipment.
•
After installation, ensure that all bolts and threaded joints are tightened.
•
After installation and completion of initial system test, a program for periodic testing of this device
must be established. Proper periodic maintenance is required to assure operation through the life of
the system, and to determine that point at which useful life of the system or of any of its components
has been reached. Any malfunctioning units must be repaired or replaced immediately by competent,
authorized personnel. Refer to NFPA 72, local Fire Codes and the authority having jurisdiction.
•
Instructions for proper response by building occupants must be developed and distributed in
accordance with the Building Code and Fire Prevention Code or other authority having jurisdiction.
•
Unauthorized repair or servicing of equipment may result in degradation of performance and/or
property damage, serious injury, or death to you or others. If a malfunctioning unit is encountered, do
not attempt any field repair/retrofit of parts.
Failure to follow all safety precautions and instructions may result in property damage, serious injury, or
death to you and others.