MOUNTING INSTRUCTIONS
VR1000 SURFACE-MOUNTED ROLLER SHUTTER
01/19
|
EN
|
36
7.
REPLACING THE MOTOR
Remove:
•
on the opposite side, the safety ring of the sprung end plug.
•
and on the motor side, the motor locking ring.
Push the axle in the direction of the sprung end plug. The spring is compressed,
and the motor head is released from the motor bracket. Pull the motor cable out of the
motor head. The axle can then be removed from the box with the motor.
Remove the motor from the axle.
Figure 17 & 18:
remove the safety and
motor locking ring
Figure 19:
remove the axle
with the motor
Figure 20:
motor from the axle
