MOUNTING INSTRUCTIONS
VR1000 SURFACE-MOUNTED ROLLER SHUTTER
01/19
|
EN
|
28
3.
GUARANTEE, TERMS AND CONDITIONS
− Harol has made every eff ort to design and manufacture this shutter in compliance with the
current CE standards. Always ensure that our version complies with your own national standards
body.
− No rights whatsoever may be inferred from these instructions. We reserve the right to make
technical changes without written notifi cation.
− For large projects, we strongly advise you to fi rst fi t one complete shutter before fi tting the
remaining shutters. This will help detect any potential faults early on and enable them to be
remedied at the lowest possible cost.
− For our general terms and conditions of sale, please refer to the price list.
− Make sure the shutter box can always be opened so the mechanical parts inside can be accessed
easily. If these instructions are not complied with, Harol cannot be held responsible for the cost of
any demolition, painting or wallpapering.
Harol NV
Industriepark 3 – 3290 Diest
Belgium
+32 (0)13 38 01 11
+32 (0)13 31 48 03
[email protected]
www.harol.com
4. LIST OF TOOLS REQUIRED
− Ladder/s
− Tape measure and pencil
− Cross-head screwdrivers
− Spirit level, plumb line or water hose
− Drill/power screwdriver
− Set of drills & bits
− Voltage meter or test lamp 230V
− Stanley knife
− Hammer and wooden protection block
