MOUNTING INSTRUCTIONS
VR1000 SURFACE-MOUNTED ROLLER SHUTTER
01/19
|
EN
|
31
GUIDE RAILS 118B - 118SB AND 135B
Fix the basic guide rail to the window using the screws provided (3 screws per meter).
If you have not chosen the option to have the guide rails pre-drilled, you must first drill
these holes.
First drill a hole of 4 mm laterally through the hollow box and then drill a hole of 9.8
mm in the front. If you have not chosen wide guide rails, you can fill this hole using the
supplied PVC plugs.
Note:
Always leave a distance of 8 cm or more from the top edge
(pivot for console!).
•
Lower side of guide rail = lower side of window
•
Rear side of guide rail = rear side of window
Standard
tolerance
X 0,5
X,X 0,1
X,XX 0,05
angle 0,5
Formaat A4
AANGEMAAKT: 7/02/2019
Self tapping Screw - #_00---
mm²/m
WIP
ARTIKEL-NUMMER
PLAN-NUMMER
STATUS
SCHAAL
MAATEENHEID: mm
KLEUR:
OPP:
MATERIAAL:
S.G.: g/cm³
VOLUME:
GEWICHT:
EUROPESE PROJECTIE
Industriepark 3 - 3290 DIEST
TEL. 013/38 01 11 - Fax. 013/31 48 03
Niet aangegeven Maat- en Vormtoleranties volgens:
Niet aangegeven wanddikte:
PROPERTY OF
2:1
SHEET: 1 OF 1
GETEKEND:
LAKOPP:
Ix=
Iy=
GEPRINT: 7/02/2019
Figure 4:
pre-drilled guide rails
Figure 5:
guide rail position
