MOUNTING INSTRUCTIONS
VR1000 SURFACE-MOUNTED ROLLER SHUTTER
01/19
|
EN
|
29
5. INSTALLATION STEPS
5.1 Inspecting the package
Inspect the package for any damage before removing all the packaging from around
the box and guide rails. Be careful when cutting the straps with a knife. Opening the
cardboard box carelessly may result in damage to the paint.
5.2. Inspecting the package and its contents
Inspect the package and its contents: check that all guide profiles have been included.
Also check the bag with accessories. Check that the screws for securing the guide rails
are present, as well as the end caps, and the warranty card.
5.3 Checking the height and width
Check the width of the shutter box and measure the window opening.
Verify that both are correct for the desired installation position.
Also check the height of the guide rails, and make sure they correspond to the height of
the 5 mm.
•
Width = measured from the back of the guide rails
•
Height = total height
Figure 1:
exploded view
