MOUNTING INSTRUCTIONS
VR1000 SURFACE-MOUNTED ROLLER SHUTTER
01/19
|
EN
|
27
1. INTRODUCTION
The VR1000 surface-mounted roller shutter is first fitted to the window frame, before
being fitted into an outside wall as an integrated unit. The roller shutter is fully
concealed, hidden in the cavity.
Because the roller shutter is separated from the thermal shell of the residence, it can be
used in new or passive and low-energy house construction projects.
This manual gives a step-by-step explanation on how to install these shutters.
2.
GENERAL WARNINGS
A number of precautions must be taken for the safe installation, operation and
maintenance of this screen. Please take note of the following warnings for the safety of
everyone concerned!
!!
These instructions are specifically intended for use by trained installers, and installation
is therefore not appropriate for non-professionals or trainees.
!!
Please read these instructions carefully before starting the installation.
!!
Proceed carefully. Ensure that you have a secure footing.
!!
Ensure there is adequate lighting in the working area. Remove any obstructions
and debris.
!!
Ensure that no other persons other than the installers are present.
Unauthorised persons can become an interference or be at risk during the installation.
!!
The roller shutter must be kept clearly in view at all times during installation and
operation. Persons in the vicinity may be at risk of injury.
!!
The installer must comply with local regulations and standards regarding electrical
connections.
!!
Our products must be installed in such a way that all parts remain accessible at
all times for maintenance and repairs. If this is not the case, Harol cannot be held
responsible for any additional costs (e.g. demolition work, repairs to exterior or interior
walls) which may result from this.
