InstallatIon and operatIon Manual for WInd and sun screen sl400
09/12
|
4
Guarantee, terms and conditions
•
Harol has endeavoured to design and manufacture the SL400 in compliance with
the current ce standards. always check that our version complies with your own
national standards.
•
no rights can be derived from these instructions whatsoever. technical modifications
are reserved without written notification.
•
all parts supplied are intended for this specific screen. adding different parts may
have a negative impact on the safety of your awning. the warranty is void if parts are
added or changed without first consulting the supplier.
•
for large projects we strongly advise you to first fit 1 complete awning before fitting
the remaining awnings. this will help detect any potential faults early on and enable
these to be remedied at the lowest possible cost.
•
for our general terms and conditions of sale: see price list.
•
Make sure the box can always be opened so the mechanical parts inside can be
reached easily. If this requirement is not respected, Harol cannot be held responsible
for the cost of demolition work or any paint work or wallpapering.
Harol nV
Industriepark 3 – 3290 diest
Belgium
+32 (0)13 38 01 11
+32 (0)13 31 48 03
[email protected]
www.harol.com
3. lIsT of Tools requIred
•
Ladder(s)
•
Box cutter
•
tape measure
•
pencil or felt pen
•
Spirit level, plumb line or hose level
•
cord
•
drill and set of stone drills
•
cross-head and flat-head screwdrivers
•
Set of open-ended and ring spanners
•
Set of allen keys
