Harmopool Hydrolyse EC20, Руководство пользователя

Страница: 22 / 31

22
Error codes and corresponding chlorinator solutions
Code Reason for failure Remark Solution
E1 Coal fin
temperature is too
high Coal fin temperature is
too high First check if the error code E6 is present, if
present , check if the temperature sensor is
connected , if connected replace the sensor ;
E2 The water
temperature is
below the normal
range The fault must be
corrected manually If error code E6 is not present, check the
installation
E3 No water The normal
temperature range is
between 10-45 degrees
Celsius First check if error code E7 is present, if this is
the case, check if the temperature sensor is
confirmed. if this is the case, replace the sensor;
E4 The salt
concentration is
too high Under normal use,
enough water in the
chlorine supply is
required. If the E7 error code is not present. check if the
water is within the operating temperature
range
E5 The salt
concentration is
too low Normal salt
concentration is 3500
ppm First check that the water level detector is
attached. Check if there is water leaking or if
there is air present. If water is present, wash
the water level detector.