10
Attention!
With salt electrolysis you may not use the dosing modes Continuous and Proportional.
Explanation of the dosing method Proportional
With the "Proportional" dosing method, the controller runs continuously through a cycle:
-
pH and chlorine content are measured and stored for 40 seconds (no dosing
at this moment)
-
The chlorine (if necessary) is dosed for 2 minutes
-
The pH-min (if necessary) is dosed for 2 minutes
The closer the pH value approaches the set value, the less the pump will run.
This dosing method (prop) is recommended for working with liquid chlorine and liquid pH
With this dosing method, pH and liquid chlorine are never dosed at the same time.
Explanation of the continuous dosing method:
-
The pumps always run when the pH and/or redox setpoint is not reached.
-
If you choose this dosing method, the injection point for pH and chlorine must be at
least 2 meters apart. The measurement must be carried out prior to injection.
Explanation of the dosing method salt time:
Explanation of the dosing method Salt (electrolysis) :
Option 1: Salt time
Here one can set a time in hours and minutes with a
maximum of: 23 hours and 59 minutes.
This means that the unit will only function on a time
basis for the creation of chlorine, so the measured
value of Rx will not be taken into account, even if the
Rx setpoint is reached, chlorine will continue to be
created on a time basis.
Содержание Hydrolyse EC20
Страница 1: ......
