How to Configure and Monitor the ProView 7000
© 2010 Harmonic Inc.
10
ProView 7000, v.2.3, Rev. A
iv Click
Show Status
in the bottom left corner of the properties dialog.
The displayed properties are divided into two sections; the section on the left
displays editable properties and the section on the right provides informative/status
properties that cannot be edited by the EMS user.
v
Configure the properties in the left section and click
Apply
.
2. To map a multiplex in port to a CAM Slot:
i
Select the required CAM Slot name in the Physical Input box.
ii
Click
Properties
on the EMS toolbar.
The dialog displays with the programs descrambled by the slot.
iii Select a multiplex in port to connect to the CAM slot.
