Harmonic Electra 9200 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 27

Harmonic Electra 9200 Скачать руководство пользователя страница 16

Chapter 3 Electra 9200 Encoding Tutorial

© 2013 Harmonic Inc. All rights reserved.

16

Electra 9200 Release 01, Rev A

Configuring an Encoder with SDI Input and IP or ASI Output

Configuring the Video

1.

Next, configure the video encoding properties. Right-click the video stream as shown in

to open the properties page. In this page you set all of the encoding and

preprocessing for the video stream.

The video properties page includes multiple panels with settings for all aspects of the
encoding process. Depending on your selections, panels are added or removed. For this
example, we will only look at the main panel. The values here are set by default. To process
the incoming video, you might need to change some of these settings.

The most important settings to consider are in the Encoding section. The input settings must
match the actual video input carried on the SDI port. Set the desired output properties for
Coding Format, Resolution, Bitrate, and so on. For specific information about these fields, see
the online help for this configuration page.

Harmonic also recommends that you provide descriptive names for your streams and
programs. By default, the encoder names your stream Video 1. You can provide a descriptive
name on this page.

2.

When you have made all your stream configuration settings, click

Apply

.

«
...
14
15
16
17
18
...
»

Содержание Electra 9200




























Отзывы:

Нет отзывов