Harmonic Electra 9200, Руководство по началу работы, Страница: 8 / 27

Chapter 2 Installation and Startup
© 2013 Harmonic Inc. All rights reserved. 8 Electra 9200 Release 01, Rev A
Using SAG, the web GUI
Displaying SAG
Before you can use SAG, you must know the Electra 9200 device’s management port IP address.
To display SAG, enter
http://<IP_Address>
in the browser, where
<IP_Address>
is the
address of the management port on the Electra 9200 you want to configure.
If you don’t know the IP address, ask your network administrator, or display the address on the
encoder’s front panel.
The platform displays a SAG page similar to Figure 2–1 on page 8.
Navigating with SAG
When you browse to an encoder device, SAG displays information about that device.
Navigation tabs to
move between task
pages Configuration page
Apply changes to
device
Active alarms log
Platform HW: inputs
Input services
Output services Platform HW: outputs
Status bar shows whether device is standalone or managed by
NMX, device name and model, active alarms, date/time
Help for each panel
and dialog
Figure 2–1: Web Gui Components
The screen in
Figure 2–1
shows an encoder with physical input of four SDI ports, and the
corresponding logical input objects; Baseband SDI 1—4. One video and one audio stream have
been added under Baseband SDI–1.