Chapter 3 Electra 9200 Encoding Tutorial
© 2013 Harmonic Inc. All rights reserved.
15
Electra 9200 Release 01, Rev A
Configuring an Encoder with SDI Input and IP or ASI Output
Defining the Logical Outputs
Next, create a transport stream in the Logical Outputs and add the input service to it.
1.
In this example, we’ll drag and drop the service from the Logical Inputs to the Logical Outputs
and let SAG create the TS and Program objects automatically, as shown in
. Note
that the TS is named TS–1. At this point, TS–1 is not assigned to an output port or socket.
Drag Baseband SDI
–
1
to +Transport Stream
SAG creates the TS and
Program
Figure 3–3: Dragging the input service to the output
2.
Enter a descriptive name for the program and click
OK
. For this example, we’ll leave all the
default properties for the TS and program.
TIP:
SAG provides several methods for creating services, including drag-and-drop and manual menu-
driven methods. These are described in the online help. This guide only shows the drag-and-drop method.
When you create services that include multiple outputs from a single source, you’ll need to use a
combination of these methods. For example, to create multiple output videos from one source, create the
first service as described above. Add a second program to the TS manually. Then create the second video
stream under the Baseband entry and drag it to the second program.