Harmonic Drive SC-610 Series, Руководство по эксплуатации

Страница: 10 / 69

Operations Manual SC-610 Page 7
Harmonic Drive AG 900105 11/2005
1.5 EMC - Conformity and CE - Marking
The application of EMC conformal component and part systems relieves the observance of EMC Guidelines
and the guarantee of conformity for the manufacturer of machines. Therefore all standard components and
part systems will be tested according to the requirements of EMC regulation.
Those tests will be executed by a competent and independent institution. The conformity of the products will
be confirmed by a declaration of conformity from the European Community.
The installation instructions refer to elimination of radio interference as well as to immunity from noise for
Harmonic Drive Systems.
Thereby the user is informed about the EMC critical parts. The examples don’t show the complete
possibilities of cabinet components or constructions.
Guidelines for CE Conformity
•
Machine Guideline (89/392/EWG) - Machine Safety Law
•
EMV Guideline (89/336/EWG) - EMC Law
•
Low Voltage Guideline (73/23/EWG) - Machine Safety Law
1.6 Technical Data
All values at Tamb = 40
°
C, if not otherwise specified. NOTE: Operation at maximum ratings
1.6.1 Power Section
General Unit SC-610-2 SC-610-5 SC-610-7
Nominal DC-Bus-Voltage VDC 160 / 320 160 / 320 160 / 320
Output Voltage Line/Line
fundamental wave;
@VDC-Bus= 320V
VRMS 0 ... 230
Nominal Phase Current (
±
10%) ARMS 2,5 5,0 7,5
Peak Phase Current (
±
10%)
ARMS
5
1)
2,4s (+0,5/-0)s
10
1)
2,4s (+0,5/-0)s
15
1)
1,25s (+0,5/-0)s
Nominal Output Power kVA 1,01 2,17 2,99
Efficiency % > 95
Output Frequency Hz 0 ... 1000
Nominal Switching Frequency kHz 8,0
1)
valid for zero current initial condition
1.6.2 24VDC Input (optional)
24V-Input (optional) Unit SC-610-X
Input Voltage Range
absolute min./max.
1)
max. Vripple =
±
10%
VDC 20.4 ... 28.8
Input Current; @ 24VDC ARMS 1.75
Surge Current at Power On
@ 24VDC; @ 100ms
ARMS 4,0
1)
NOTE: Operation at maximum ratings may impair the useful life time