Harman® • PF-120 Installation Manual_R1 • 2014 -___ • 03/14
27
3-90-08121i
6
Reference Material
A. Safety Reminders
When installing and operating your PF-120, respect basic
safety standards. Read these instructions carefully before
you attempt to install or operate the PF-120. Failure to do
so may result in damage to property or personal injury and
may void the product warranty.
Consult with your local building code agency and insurance
representative before you begin your installation to ensure
compliance with local codes, including the need for permits
and follow-up inspections.
Due to high temperatures, this furnace should be placed out
of traffic and away from combustible materials.
Children and adults should be alerted to the hazards of high
surface temperatures and should stay away to avoid burn to
skin and/or clothing.
Young children should be carefully supervised when they are
in the same room as the furnace.
Clothing and other flammable materials should not be placed
on or near this furnace.
Installation and repair of this furnace should be done by a
qualified service person. The appliance should be inspected
before use and at least annually by a qualified service person.
More frequent cleaning will be required. It is imperative
that control compartments, burners, and circulating air
passageways of this furnace be kept clean.
After installation of the add-on, maintain the air flow
through the oil or gas furnace to the specifications of the
manufacturer of the oil furnace.
The installation of a solid fuel furnace shall comply with the
applicable requirements of CSA B365, if changes are made
to the installation of the oil furnace, they shall comply with
CSA B139.
The installation of a gas furnace shall comply with the
applicable requirements of CSA B365, and if changes
are made to the installation of the gas furnace, including
clearances for servicing, these shall comply with CSA
B149.1 and CSA B149.2.
• IF APPLICABLE - OPERATE THE ELECTRIC
FURNACE PERIODICALLY TO ENSURE THAT IT
wILL OPERATE SATISFACTORILY wHEN NEEDED.
• THE OPERATION OF THE GAS FURNACE MUST BE
VERIFIED FOR ACCEPTABLE OPERATION BEFORE
AND AFTER INSTALLATION OF THE ADD-ON
APPLIANCE BY A GAS FITTER wHO IS RECOGNIZED
BY THE AUTHORITY HAVING JURISDICTION.”
• DO NOT CONNECT TO ANY FURNACE THAT HAS
NOT BEEN CERTIFIED INITIALLY AS COMPLYING
wITH ANSI Z21.47/CSA 2.3 OR ITS PRECEDENTS.
• DO NOT CONNECT TO ANY FURNACE THAT IS NOT
EQUIPPED wITH AN AIR-CIRCULATION BLOwER.
THE FURNACE IS HOT wHILE IN OPERATION.
KEEP CHILDREN, CLOTHING AND FURNITURE AwAY.
CONTACT MAY CAUSE SKIN BURNS.
CAUTION
!
This appliance must be vented to the outside.
CAUTION
!
KEEP COMBUSTIBLE MATERIALS SUCH AS GRASS,
LEAVES, ETC. AT LEAST 3 FEET AwAY FROM THE
POINT DIRECTLY UNDER THE VENT TERMINATION.
WARNING
!
USE OF IMPROPER FUELS, FIRE STARTERS OR
ALTERING THE FURNACE FOR HIGHER HEAT
OUTPUT MAY CAUSE DAMAGE TO THE FURNACE
AND COULD RESULT IN A HOUSE FIRE. USE ONLY
APPROVED FUELS AND OPERATION GUIDELINES
WARNING
!
THE BLOwER ITSELF SHALL NOT BE CHANGED
CAUTION
!
THE EQUIPMENT SHALL BE INSTALLED IN
ACCORDANCE wITH THE INSTRUCTIONS OF THE
MANUFACTURER AND IN A MANNER ACCEPTABLE
TO THE AUTHORITY HAVING JURISDICTION BY
EXPERIENCED PERSONNEL. wHEN REQUIRED
BY THE AUTHORITY HAVE JURISDICTION, SUCH
PERSONNEL SHALL BE LICENSED TO PERFORM
THIS SERVICE.
CAUTION
!
• DO NOT CONNECT, UNDER ANY CIRCUMSTANCES,
TO THE CHIMNEY OR VENT SERVING A GAS
FURNACE OR GAS APPLIANCE.
• IF APPLICABLE - OPERATE THE GAS-FIRED UNIT
PERIODICALLY TO ENSURE THAT IT wILL OPERATE
SATISFACTORILY wHEN NEEDED.
