Harman OAKLEAF 1-90-797000, Руководство пользователя

Страница: 29 / 40

29
Save These Instructions 3-90-798 Dry Seasoned Wood Only!
Oakleaf Woodburning stove
B. general Maintenance procedures
1. ash Removal
• frequency: As needed / Every day or two
• By: User
Wear Leather gloves To prevent skin Burns!
Open the ash removal door by lifting upward on the
latch handle, then swing the door open. Pull the ash
pan out of the firebox, using the lip on the front of the
pan. Once the ash pan is removed from the stove, you
can flip the carry handle up for convenience.
If removing ashes while a fire is burning, close and
latch the ash door while disposing of the ashes.
DO NOT leave the appliance unattended with the ash
door open.
ashes must be placed in a metal container with
a tight fitting lid. The closed container of ashes
should be placed on a non-combustible floor or
on the ground, well away from all combustible
materials, pending final disposal. If the ashes are
disposed of by burial in soil or otherwise locally
dispersed, they should be retained in the closed
container until all cinders have thoroughly cooled.
do not use the ash container for other debris or
yard waste.
2. door glass
• frequency: As needed / Weekly
• By: User
Whenever the view of the fire is obstructed, or weekly,
clean the glass using a soft cloth dampened with
standard household glass cleaner.
Never spray glass cleaner directly onto hot glass.
apply the cleaner to the cloth then wipe the glass.
fly-ash allowed to accumulate on the glass may
lead to permanent fogging or "crazing" of the
glass.
Inspect the glass and sealing gasket. Replace gasket
as needed. Do not operate the stove with a broken
glass. Replacement glass, which is ceramic glass,
should be obtained only through your Harman dealer.
To replace a broken glass; first be sure to carefully
remove the broken glass and any remaining shards or
pieces. With the door laying on a flat surface, lay the
gasketted glass panel onto the door and be sure it is
properly fitted into the channel. Lay the glass retainer
clips in place near each corner, and secure them using
the 3/8" screws. Be sure to tighten each screw equally
so you don't create a pressure point on the glass.
Glass Retainer
screws
Glass Panel
Gasket
Glass Retainers
Door Frame
WaRNINg:
dO NOT aBusE gLass By sTRIkINg
OR sLaMMINg THE dOOR CLOsEd. THIs TypE Of
BREakagE Is NOT COvEREd By THE pROduCT
WaRRaNTy.
CAuTion: never use AbrAsive mATeriALs on
The gLAss.