22
MAC Ultra Performance User Guide
To run a test:
• In the
FIXTURE TEST
menu, scroll to
TEST ALL
,
TEST LEDS
,
TEST EFFECTS
or
TEST PAN/TILT
and
press ENTER.
• In the
TEST EFFECTS
menu, scroll to the effect you want to test and press ENTER to start a test
sequence for that effect.
• In the
TEST PAN/TILT
menu, choose
PAN
or
TILT
, make sure that the fixture base is held securely and
that there is no danger of the fixture falling over or head colliding, then press ENTER to start the test
sequence.
• Press MENU to stop the test sequence.
Manual control
The
MANUAL CONTROL
menu lets you reset the fixture and operate it without a DMX controller.
To execute commands in the
MANUAL CONTROL
menu, select the effect that you want to control, then
enter a value from 0 to 255 for 8-bit commands or 0 to 65536 for 16-bit commands to apply that command.
The menu items and values available correspond to the commands listed in the DMX protocol in this User
Manual.
When you exit the
MANUAL CONTROL
menu, the fixture will keep its effect positions and settings until you
enter a new menu. When you do this, the fixture will revert to default positions and settings. The fixture will
also revert to default positions and settings if you exit and then re-enter
MANUAL CONTROL
.
Service
Servicing the fixture and the contents of the
SERVICE
menu are covered in the MAC Ultra Performance
Safety and Installation Manual supplied with fixtures and available for download from the product pages on
the Martin website at www.martin.com.
Содержание Martin MAC Ultra Performance
Страница 1: ...MAC Ultra Performance User Guide...
Страница 41: ...www martin com...