Hardy HI6800 Series, Руководство пользователя

Страница: 35 / 121

Chapter 3 – Installation
Hardy H6800 Series Application Controllers User Guide 35
3.3.2.2 DIN Rail Mount
The HI6800 Series Application Controllers are available in a DIN rail-mount configuration.
Use this configuration when mounting the controller with a remote display or to operate the
controller as a “blind unit” (without display).
Note : Blind units are controllers that do not have a front panel display (the display
is not necessary to monitor and operate the controller). Blind units can be fully
configured using a web browser (see Chapter 5).
1. To install, pull down the DIN rail clip to expose both of the DIN rail hooks.
2. First hook the fixed part of DIN rail bracket onto the DIN rail using the groove at the top of
the bracket.
3. Push the other side of the DIN rail bracket onto the DIN rail until it locks in place.
4. While holding the HI6800 Series Application Controller, gently pull up away from the DIN
rail to verify that it is mounted correctly.
Figure 3-2. Completed DIN Rail Mount Assembly