Hardinge Talent 6/45, Руководство по обслуживанию

Страница: 25 / 104

LIVE TOOL GEAR LUBRICATION
- NOTE -
Use Klübersynth UH1 14-1600 grease for live tool gear lubrication.
The live tool gear lubrication should be checked every 2000 hours of machine operation.
1. Remove plug screw "I", Figure 2.8 or 2.9.
2. Insert a thin tool into the turret, as shown in Figure 2.10, and touch the live tool gear.
- CAUTION -
Contact a Duplomatic Service Center if metallic dust, coolant, or oil is de-
tected in the grease.
3. Check the tool tip for the presence of grease:
If grease is detected, no action is required.
If grease is not detected, add 2 ~ 2.4 in
3
[30 ~ 40 cm
3
] of grease as shown in Figure 2.11.
4. Replace the plug screw.
5. If necessary, clear the lubrication alarm as outlined in "Lubrication Alarm", page 2-2.
M-448B 2-7
Figure 2.8 - Grease Plug Location
(TALENT
®
6/45 and 8/52 Lathes)
TP7097
I
Figure 2.9 - Grease Plug Location
(TALENT 8/66 and 10/78 Lathes)
TP7100
I
Figure 2.10 - Checking the Grease
TP7098
Figure 2.11 - Adding Grease
TP7099