Hardinge Talent 6/45, Руководство по обслуживанию

Страница: 24 / 104

TAILSTOCK LUBRICATION ON TALENT
®
8/66 AND 10/78 LATHES
1. Wait for the cycle to end and that the spindles and slides are stationary.
- NOTE -
Refer to the Operator’s Manual (M-447) for information on using Jog mode to move
the tailstock.
2. Move the tailstock toward the guard door opening to gain access to grease fitting “H”, Figure
2.7.
3. Power down and lock out the machine. Refer to the appropriate power-down procedure in
Chapter 1.
4. Clean the grease fitting.
- NOTE -
Only use a manually operated grease gun.
5. Attach the grease gun nozzle to the grease fitting; slowly and evenly pump in the specified
amount of grease.
6. Wipe the fitting clean of excess grease.
7. Power up the machine. Refer to the appropriate power-up procedure in Chapter 1.
8. Move the tailstock to the fixed Home position.
9. If necessary, clear the lubrication alarm as outlined in "Lubrication Alarm", page 2-2.
2-6 M-448B
Figure 2.7 - Tailstock Grease Fitting
H
TP6037