Hardi NAVIGATOR FORCE, Инструкция

Страница: 49 / 118

4 - Sprayer setup
49
Track width, axles and wheels
Altering the Track Gauge (optional)
The track gauge of the sprayer can be altered stepless as follows,
Altering procedure
1.
Measure the current track width (centre right tyre to centre left
tyre). Each side must be extended or retracted half the desired
alteration.
2.
Attach the sprayer to tractor and engage tractor parking brake.
3.
Place stop wedges in front of and behind right wheel. Jack up left
wheel, support and secure sprayer body.
4.
Loosen the counternut at the bolts (A) and the bolts (A) for left
wheel axle.
5.
When having a handbrake, loosen the pointed screw (B) on the
brake operating arm.
6.
Extend or retract the axle. A sack barrow and a rod will facilitate the
operation.
7.
Lower down the left wheel.
8.
Tighten the clamp bolts (A) to a torque of 250 Nm and lock the
bolts with the counternuts.
9.
Repeat the procedure on right wheel.
10.
Check if the distance from centre tyre to centre of rear frame is equal at right and left side.
11.
Retighten bolts and wheel bolts to specified torque after 8 hours of work.
μ
ATTENTION! The wider the track width, the better the stability of the sprayer. HARDI recommends to work with widest
possible track width.
μ
ATTENTION! Depending on configuration of the machine, the track width can be altered in the range from 1800 mm
to 2250 mm, in combination of above adjustments and turning of the rims (offset).
Turning the Wheel Rim
Track width can be altered by turning the rims.
After turning the rim around in both sides of the sprayer, the additional
track width can be found in the table below.
÷
The rim centre is offset from the wheel hub by 50 mm inwards at
delivery.
μ
ATTENTION! When wheels have been mounted or re-tightened,
the plastic covers must be mounted on the nuts afterwards.
For 5000 and 6000 litre models, only 10-bolt rims are applicable.
Rim size Fixing bolts New track width
- 8 pcs. 222 mm more
520/85/R42 10 pcs. 226 mm more
650/85/R42 10 pcs. 226 mm more
520/85/R46 10 pcs. 230 mm more
900/50/R42 10 pcs. 230 mm more