manualshive.com logo in svg

Hardi COMMANDER DELTA FORCE, Инструкция, Страница: 114 / 218

Поделиться
Скачать
Hardi COMMANDER DELTA FORCE Скачать руководство пользователя страница 114

5 - Operation

114

Filling of Rinsing Tank

The rinsing tank is filled via the 1” threaded connection piece (A): 

1.

Remove the filler cap, then fit the external water hose to the 
threaded connection piece.

2.

Engage external water pump, if any.

3.

Keep an eye on the level indicator in order not to overfill the tank.

4.

Stop filling and refit the cap.

Volume: approximately 500 litres. 

μ

ATTENTION! Only fill rinsing tank with clean water! To avoid algae 
developing in the rinsing tank, always drain this tank, if the 
sprayer is not in use for a longer period of time.

μ

ATTENTION! For cleaning and inspection purposes, the rinsing 
tank is accessible via the tank lid on top of the tank.

Filling of Clean Water Tank

To fill the clean water tank:

1.

Remove the tank lid.

2.

Fill with clean water.

3.

Refit the tank lid.

For use of water:

•

Turn the lever to open the ball valve. The ball valve (A) is located on 
the left side of the sprayer next to the EasyClean filter.

The water from this tank is for hand washing, cleaning of clogged 
nozzles etc.

±

WARNING! Although the clean water tank is only filled with clean 
water, this water must NOT be used for drinking.

μ

ATTENTION! Only fill this tank with clean water! To avoid algae 
developing in the clean water tank, always drain this tank, if the 
sprayer is not in use for a longer period of time.

Содержание COMMANDER DELTA FORCE



























































































































































































































Отзывы:

Нет отзывов